Author(s):
1. Dejan Branković, SHP Celex , Republic of Srpska, Bosnia and Herzegovina
2. Boris Latinović, SHP Celex , Republic of Srpska, Bosnia and Herzegovina
3. Zdravko Milovanović, Faculty of Mechanical Engineering, Republic of Srpska, Bosnia and Herzegovina

Abstract:
This paper provides an analysis of the condition of real industrial system after the implementation of new solution of the paper machine dewatering system in the production industry system SHP Celex a.d. Banja Luka. The new solution is the use of new type of polyurethane cover of the paper machine suction press roll. Compared to the previously used rubber coat, the dewatering performance is significantly positively changing. The measure of change of the condition of system is the increase of dryness of paper which unambiguously determines a lower specific energy consumption per ton of paper produced. New technical and technological solution enables an increase in the interval between two consecutive cycles of grinding of suction press roll cover. Since those are the planned annual cycles of grinding and significant costs of grinding of the coat, the significant economic effects have been achieved within the maintenance plan.

Key words:
energy saving,production efficiency,maintenance costs,water evaporation

Thematic field:
Maintenance of Engineering Systems and Occupational Safety Engineering

Date of abstract submission:
27.04.2015.

Conference:
12th International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology (DEMI 2015)

Final paper Applied paper from author